polymer filtration pleated metal filter element-新乡市紫文过滤设备有限公司

Polymer Filtration Pleated Metal Filter Element

来源：http://www.zwenfilters.com/news/597.html 更新时间：2020-05-11 点击次数：53次

Polymer Filtration Pleated Metal Filter Element Technical Parameter

Raw Material: SS 316L, SS 304

Filter Media: ZWEN Sintered Fiber Felt

Filter Rating Range: 1 Micron ~ 300 Microns

Filter Efficiency: > 99.99 %

Operation Temperature: ≤ 816 ℃

Outside Diameter: 50 mm, 60 mm, 63.5 mm, 65 mm, 70 mm,

110 mm, 150 mm, 300 mm, 400 mm or others

Length: 5'' (127 mm), 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others

Gasket: PTFE, Viton, Silicone, Buna-n, EPDM

Connector/Fitting/Adaptor:

1. DOE

2. Code 2 (226+Flat End)

3. Code 3 (222+Flat End)

4. Code 7 (226+Fin End)

5. Code 8 (222+Fin End)

6. Thread (NPT,BSP,G,M,R)

7. Flange

8. Special customization

Polymer Filtration Pleated Metal Filter Element Feature

1. Polymer filtration pleated metal filter element has large filter area

2. Polymer filtration pleated metal filter element is depth filtration

3. Polymer filtration pleated metal filter element has high dirt holding capacity because of three dimensional fiber structures of zwen sintered fiber felt

4. Polymer filtration pleated metal filter element has a very high filter efficiency because of different fiber layers density gradients of zwen sintered fiber felt

5. High porosity

6. High filter rating accuracy

7. High temperature resistance

8. High corrosion resistance

9. Pressure rise rate is slow in the filtration process

10. Pressure loss is low in the filtration process

11. High flow rate at low differential pressure

12. Washable and Cleanable

13. Reusable

14. Long service life

About Us

XINXIANG ZWEN FILTER CO.,LTD produces pleated mesh filter element, pleated metal filter element, pleated sintered fiber felt filter element, pleated ss filter element, and pleated stainless steel filter element.